CompTIA Network+ N10-007 uCertify Labs
Enroll in the CompTIA Network+ N10-007 performance-based labs to get the hands-on expertise in the CompTIA Network+ N10-007 certification exam. Performance-based labs simulate real-world, hardware, software & command line interface environments and can be mapped to any text-book, course & training. The performance-based labs offer complete coverage of N10-007 exam objectives and includes topics such as wireless technologies; network optimization, management, security, and troubleshooting; and many more. The performance-based labs offer hands-on learning and increases student engagement with the help of real-world scenarios.
Here's what you will get
The CompTIA Network+ certification is an internationally recognized, one of the most demanded vendor-neutral credential that validates the technical knowledge required of foundation-level IT network practitioners. The N10-007 exam validates your expertise to design and implement functional networks, configure, manage, and maintain essential network devices; use devices such as switches and routers to segment network traffic and create resilient networks; identify benefits and drawbacks of existing network configurations, and support the creation of virtualized networks.
Performance lab
107+
|
Exam FAQs
| |
|---|---|
| What are the prerequisites for this exam? | There is no official prerequisite for CompTIA N10-007 certification exam, but CompTIA recommends that candidate must hold CompTIA A+ Certification and nine months of networking experience. |
| What is the exam registration fee? | USD 302 |
| Where do I take the exam? | Pearson VUE |
| What is the format of the exam? | Multiple Choice Questions (single and multiple response), drag and drop, and performance-based type questions |
| How many questions are asked in the exam? | The exam contains 90 questions. |
| What is the duration of the exam? | 90 minutes |
| What is the passing score? | 720 (on a scale of 100-900) |
| What is the exam's retake policy? | In the event that you fail your first attempt at passing the Network+ examination, CompTIA's retake policies are:
|
| What is the validity of the certification? | CompTIA Network+ certifications are valid for three years from the date the candidate is certified, after which the certification holder will need to renew their certification via CompTIA's Continuing Education Program. |
| Where can I find more information about this exam? | To know more about the pearson-N10-007-lab, click here. |
| Which certification covers this exam? | |
| What are the career opportunities after passing this exam? |
|
Here's what you will learn
Hands on Activities (Labs)
- Identifying network components
- Identifying network categories
- Connecting devices in bus topology
- Identifying network topologies
- Understanding wireless topologies
- Connecting devices in a peer to peer architecture
- Identifying client and server
- Identifying OSI layers
- Identifying abbreviations for various Internet layer protocols
- Identifying TCP/IP protocol layers
- Describing OSI layers
- Identifying TCP/IP layers
- Identifying OSI layer functions
- Connecting a computer system to the network
- Identifying types of cable and connector
- Identifying twisted-pair cable connectors
- Identifying cable configuration types
- Connecting a router to the laptop
- Connecting a hub to a switch
- Connecting the hub with different devices using USB cables
- Creating a virtual switch
- Connecting the DHCP server and laptop to the VLAN
- Obtaining IP address information from a DHCP server
- Creating DNS domains
- Installing a NIC
- Connecting to a server using Remote Desktop Connection
- Identifying protocols and devices
- Identifying Fast Ethernet standards
- Connecting patch cables between the patch panel and switch ports
- Understanding STP Port Cost
- Capturing packet using Wireshark
- Converting decimal number to binary
- Understanding types of addresses
- Connecting a workstation to the LAN and configuring IPv4 properties
- Obtaining automatic private IP addressing
- Configuring automatic private IP addressing
- Configuring IPv4 address
- Adding DNS server
- Using subnet calculator
- Identifying steps for calculating subnets
- Understanding types of IPv6 data flows
- Configuring and testing IPv6 addresses
- Adding and removing an IPv6 address
- Identifying administrative distances
- Identifying routing protocols
- Describing Network Address Translation
- Identifying NAT IP addresses
- Understanding IGMP
- Identifying WAN connection types
- Creating a dial-up connection
- Identifying MPLS network elements
- Connecting cable Internet access for your network
- Adding static routes in RRAS
- Connecting a wireless router to the laptop
- Identifying WLANs
- Troubleshooting AP
- Configuring SSID
- Connecting to a password protected network
- Configuring Windows 10 wireless settings
- Understanding network architecture
- Understanding QoS configuration
- Connecting systems to the Internet through a router
- Understanding the arp command
- Understanding ipconfig commands
- Analyzing network paths with tracert
- Using the nbtstat command
- Using the netstat command
- Using the nslookup command
- Checking IP connectivity between two network devices
- Deleting the route
- Adding the route
- Using dig command
- Using host command
- Configuring and verifying interface's IP address configuration
- Using traceroute command
- Using netstat command
- Using ping command
- Adding a static route
- Adding a static ARP entry with the arp command
- Deleting a static ARP entry with the arp command
- Checking the Internet speed
- Identifying Syslog severity levels
- Viewing TCP frame details using Network Monitor
- Viewing the logs
- Filtering entries in Event Viewer
- Identifying sequence of asymmetric encryption
- Identifying Denial of Service attack
- Identifying network attacks
- Scanning using nmap
- Running the Nessus vulnerability scan
- Identifying Bluetooth devices attacks
- Identifying types of firewall
- Configuring Windows firewall settings
- Turning on Windows Firewall
- Setting up a DMZ on a SOHO router
- Creating a remote access VPN connection
- Understanding IPsec VPN
- Identifying detection methods
- Changing passwords for the router
- Troubleshooting a network
- Diagnosing a network problem
- Troubleshooting physical link layer issues
- Identifying physical layer issues
- Troubleshooting data link layer issues
- Understanding data structures
- Diagnosing networking issues
- Identifying error in net connection
pearson-N10-007_pro
uCertify provides courses, simulator, labs, test prep kits for IT certifications including Microsoft, Oracle, Cisco, CompTIA, CIW, PMI, ISC2, Linux, Zend, IC3, Adobe, and many more.
© 2002-2019 uCertify.
All Rights Reserved
Know Us
- About us
- Careers
- Partners
- Sitemap
- Contact us
- Terms & Conditions
- Privacy Statement