CCNA Certification Study Guide, Volume 2 (200-301)

(200-301-VOL2.AE1)/ISBN:9781644592625

This course includes
Lessons
TestPrep
LiveLab
Mentoring (Add-on)

Get certified for the Cisco CCNA certification exam with the CCNA Certification Study Guide, Volume 2 (200-301) course and lab. The CCNA course and lab cover the CCNA 200-301 exam objectives and provides an understanding of the topics such as access points, controllers (Cisco DNA Center and WLC), endpoints, servers, virtualization fundamentals, Cisco Wireless Architectures, and AP modes, and more.

Here's what you will get

A candidate's knowledge and skills required to install, configure, and manage a small to medium-sized network are validated by the Cisco CCNA certification. This certification gives a solid foundation in networking, security, and automation fundamentals. All support technicians involved in the installation, operation, and verification of Cisco networks should take the CCNA 200-301 exam.

Lessons

25+ Lessons | 118+ Exercises | 266+ Quizzes | 546+ Flashcards | 546+ Glossary of terms

TestPrep

49+ Pre Assessment Questions | 2+ Full Length Tests | 99+ Post Assessment Questions | 198+ Practice Test Questions

Hand on lab

33+ LiveLab | 34+ Video tutorials | 46+ Minutes

Here's what you will learn

Download Course Outline

Lessons 1: Introduction

  • Cisco’s Network Certifications
  • What Does This Course Cover?
  • CCNA Exam Overview
  • CCNA Certification Exam 200-301 Objectives

Lessons 2: Network Fundamentals

  • Network Components
  • Next-Generation Firewalls and IPS
  • Network Topology Architectures
  • Physical Interfaces and Cables
  • Ethernet Cabling
  • Summary
  • Exam Essentials

Lessons 3: TCP/IP

  • Introducing TCP/IP
  • TCP/IP and the DoD Model
  • IP Addressing
  • IPv4 Address Types
  • Summary
  • Exam Essentials

Lessons 4: Easy Subnetting

  • Subnetting Basics
  • Summary
  • Exam Essentials

Lessons 5: Troubleshooting IP Addressing

  • Cisco’s Way of Troubleshooting IP
  • Summary
  • Exam Essentials

Lessons 6: IP Routing

  • Routing Basics
  • The IP Routing Process
  • Configuring IP Routing
  • Configuring IP Routing in Our Network
  • Dynamic Routing
  • Routing Information Protocol (RIP)
  • Summary
  • Exam Essentials

Lessons 7: Open Shortest Path First (OSPF)

  • Open Shortest Path First (OSPF) Basics
  • Configuring OSPF
  • OSPF and Loopback Interfaces
  • Verifying OSPF Configuration
  • Summary
  • Exam Essentials

Lessons 8: Layer 2 Switching

  • Switching Services
  • Configuring Catalyst Switches
  • Summary
  • Exam Essentials

Lessons 9: VLANs and Inter-VLAN Routing

  • VLAN Basics
  • Identifying VLANs
  • Routing Between VLANs
  • Configuring VLANs
  • Summary
  • Exam Essentials

Lessons 10: Enhanced Switched Technologies

  • Spanning Tree Protocol (STP)
  • Types of Spanning-Tree Protocols
  • Modifying and Verifying the Bridge ID
  • Spanning-Tree Failure Consequences
  • PortFast and BPDU Guard
  • EtherChannel
  • Summary
  • Exam Essentials

Lessons 11: Access Lists

  • Perimeter, Firewall, and Internal Routers
  • Introduction to Access Lists
  • Standard Access Lists
  • Extended Access Lists
  • Monitoring Access Lists
  • Summary
  • Exam Essentials

Lessons 12: Network Address Translation (NAT)

  • When Do We Use NAT?
  • Types of Network Address Translation
  • NAT Names
  • How NAT Works
  • Testing and Troubleshooting NAT
  • Summary
  • Exam Essentials

Lessons 13: IP Services

  • Exploring Connected Devices Using CDP and LLDP
  • Network Time Protocol (NTP)
  • SNMP
  • Syslog
  • Secure Shell (SSH)
  • Summary
  • Exam Essentials

Lessons 14: Security

  • Network Security Threats
  • Three Primary Network Attacks
  • Network Attacks
  • Security Program Elements
  • Layer 2 Security Features
  • Authentication Methods
  • Managing User Accounts
  • Security Password Policy Elements
  • User-Authentication Methods
  • Setting Passwords
  • Summary
  • Exam Essentials

Lessons 15: First Hop Redundancy Protocol (FHRP)

  • Client Redundancy Issues
  • Introducing First Hop Redundancy Protocol (FHRP)
  • Hot Standby Router Protocol (HSRP)
  • Summary
  • Exam Essentials

Lessons 16: Virtual Private Networks (VPNs)

  • Virtual Private Networks
  • GRE Tunnels
  • Summary
  • Exam Essentials

Lessons 17: Quality of Service (QoS)

  • Quality of Service
  • Trust Boundary
  • QoS Mechanisms
  • Summary
  • Exam Essentials

Lessons 18: Internet Protocol Version 6 (IPv6)

  • Why Do We Need IPv6?
  • The Benefits and Uses of IPv6
  • IPv6 Addressing and Expressions
  • How IPv6 Works in an Internetwork
  • IPv6 Routing Protocols
  • Configuring IPv6 on Our Internetwork
  • Configuring Routing on Our Internetwork
  • Summary
  • Exam Essentials

Lessons 19: Troubleshooting IP, IPv6, and VLANs

  • Endpoints
  • Servers
  • IP Config
  • Troubleshooting IP Network Connectivity
  • Troubleshooting IPv6 Network Connectivity
  • Troubleshooting VLAN Connectivity
  • Summary
  • Exam Essentials

Lessons 20: Wireless Technologies

  • Wireless Networks
  • Basic Wireless Devices
  • Wireless Principles
  • Nonoverlapping Wi-Fi channels
  • Radio Frequency (RF)
  • Wireless Security
  • Summary
  • Exam Essentials

Lessons 21: Configuring Wireless Technologies

  • WLAN Deployment Models
  • Setting Up a Wireless LAN Controller (WLC)
  • Joining Access Points (APs)
  • Wireless LAN Controllers (WLC)
  • WLC Port Types
  • WLC Interface Types
  • AP Modes
  • AP and WLC Management Access Connections
  • Summary
  • Exam Essentials

Lessons 22: Virtualization, Automation, and Programmability

  • Virtual Machine Fundamentals
  • Virtualization Components
  • Virtualization Features
  • Virtualization Types
  • Virtualization Solutions
  • Automation Components
  • Summary
  • Exam Essentials

Lessons 23: SDN Controllers

  • Traditional Network Monitoring Systems (NMS)
  • Traditional Network Configuration Managers (NCMs)
  • Traditional Networking
  • Introduction to SDN
  • Separating the Control Plane
  • Controller-Based Architectures
  • SDN Network Components
  • DNA Center Overview
  • Summary
  • Exam Essentials

Lessons 24: Configuration Management

  • Team Silos
  • DevOps
  • Infrastructure as Code (IaC)
  • Ansible
  • Ansible Tower/AWX
  • Puppet
  • Chef
  • Summary
  • Exam Essentials

Appendix A: Additional Content

Hands-on LAB Activities

TCP/IP

  • Showing Cisco IOS File Systems Configuration on a Router

Easy Subnetting

  • Configuring a CIDR-Based IP Network

Troubleshooting IP Addressing

  • Viewing the IP Address, Mask, and Default Router Settings on Windows
  • Viewing the IP Address, Mask, and Default Router Settings on Linux

IP Routing

  • Using the show ip route Command

Open Shortest Path First (OSPF)

  • Configuring OSPF

Layer 2 Switching

  • Using the show Command
  • Implementing Port Security

VLANs and Inter-VLAN Routing

  • Configure Interfaces as Trunk Ports
  • Creating a New VLAN and Placing Switch Ports into that VLAN

Enhanced Switched Technologies

  • Configuring Port Fast and Rapid Spanning Tree

Access Lists

  • Creating and Applying an ACL at the CLI Using Named Access List Configuration
  • Adding to and Displaying a Numbered ACL Configuration

Network Address Translation (NAT)

  • Configuring Network Address Translation

IP Services

  • Setting the Date, Time, Timezone, and Daylight Savings Time
  • Seeing Severity 3 and 5 Messages at the Console and Severity 3 Only in the Buffer
  • Configuring Syslog and Viewing Settings on a Router
  • Disabling the Timestamp and Enabling a Sequence Number in Log Messages

Security

  • Using Dig for Passive Reconnaissance
  • Using nslookup for Passive Reconnaissance 
  • Using Ettercap for ARP Spoofing
  • Spoofing MAC Address
  • Configuring DHCP Snooping
  • Encrypting IOS Passwords with the service password-encryption Command
  • Encoding a Password as Type 5 (MD5)

First Hop Redundancy Protocol (FHRP)

  • Configuring HSRP

Virtual Private Networks (VPNs)

  • Configuring GRE Tunnels

Internet Protocol Version 6 (IPv6)

  • Enabling IPv6 Routing and Routing Protocols
  • Configuring Static Routing

Troubleshooting IP, IPv6, and VLANs

  • Configuring VLANs

SDN Controllers

  • Configuring SNMPv3

Configuration Management

  • Creating and Running a Playbook
  • Creating an ansible.cfg File

Exam FAQs

There is no formal requirements for taking the new exam. However, Cisco recommends that the candidate should have:

  •  An understanding of all exam topics
  • Good grasps of network fundamentals
  • One or more years of experience with computer networking and Cisco equipments

USD 300

  • Simlet
  • Testlet
  • Simulation
  • Drag-and-drop
  • Fill-in-the-blank
  • Multiple choice (single and multiple answers)

The exam contains 100-120 questions.

120 minutes

800-850

(on a scale of 300-1000)

The policies for retaking exams are as follows:

  • Candidates who fail an Associate, Professional, or Specialist exam must wait a period of five (5) calendar days, beginning the day after the failed attempt, before they may retest for the same exam.
  • Candidates who fail any Cisco Certified Internetwork Experts (CCIE) certification or Cisco Certified Design Expert (CCDE) written exam must wait for a period of 15 calendar days, beginning the day after the failed attempt, before retaking the same exam.
  • Once passed, a candidate must wait a minimum of 180 days before taking the same exam with an identical exam number.
  • Candidates who violate these policies are in violation of the agreement. Such conduct is strictly prohibited as described in the Cisco certification and confidentiality agreement.