Pearson Cisco: CCNA Routing and Switching (ICND2 200-105) Official Cert Guide

With Cisco CCNA ICND2 200-105 official cert guide you'll study all of the Cisco CCNA fundamentals. Each section of this course includes easy understanding of the topics and concepts starting with Implementing Ethernet Virtual LANs, Spanning Tree Protocol Implementation, LAN Troubleshooting, Implementing OSPF for IPv4, Basic IPv4 Access Control Lists, and many more with the interactive lessons, test-prep, quizzes, exercises, and other resources. This course covers all the objectives of the Cisco CCNA Routing and Switching ICND2 200-105 certification exam.

Here's what you will get

The Interconnecting Cisco Networking Devices Part 2 (Cisco ICND2 200-105) exam is associated with the Cisco CCNA Routing and Switching certification. Cisco ICND2 200-105 is a globally recognized, foundation-level credential designed for IT professionals, IT network practitioners to validate the expertise and technical knowledge required for LAN switching fundamentals; infrastructure maintenance; infrastructure services; network fundamentals; and routing fundamentals. The exam validates your expertise in understanding of IPv4 and IPv6 principles and working, troubleshooting; EIGRP concepts; and lot more.

Lessons
Lessons
40+
Quizzes
148+
Flashcards
577+
Glossary of terms
577+
Test prep
Pre-assessment Questions
94+
Full Length Tests
2+
Post-Assessment Questions
97+

Videos and How To..

uCertify course includes videos to help understand concepts. It also includes How Tos that help learners with how to accomplish certain tasks.

Video Lessons
Videos
4+
Minutes
54+
Exam FAQs
Where do I take the exam? Pearson VUE
How many questions are asked in the exam? The exam contains 55-65 questions.
What is the duration of the exam? 90 minutes
What is the exam's retake policy?

The policies for retaking exams are as follows:

  • Once passed, a candidate must wait a minimum of 180 days before taking the same exam with an identical exam number.
  • Candidates who fail any CCIE or CCDE written exam must wait for a period of 15 calendar days, beginning the day after the failed attempt, before retaking the same exam.
  • Candidates who violate these policies are in violation of the agreement. Such conduct is strictly prohibited as described in the Cisco Certification and Confidentiality Agreement.
  • Candidates who fail an Associate, Professional, or Specialist exam must wait a period of five (5) calendar days, beginning the day after the failed attempt, before they may retest for the same exam.
Where can I find more information about this exam? To know more about the ICND2-200-105, click here.
Which certification covers this exam?
What are the career opportunities after passing this exam?
  • Network Specialist
  • Network Technician
  • Network Administrator
  • Network Support Engineer

Here's what you will learn

  • About the Exams
  • Book Features
  • Book Organization, Lessons, and Appendixes
  • Reference Information
  • PCPT Exam Databases with This Book
  • About Mind Maps
  • About Building Hands-On Skills
  • For More Information
  • A Brief Perspective on Cisco Certification Exams
  • Five Study Plan Steps
  • Things to Do Before Starting the First Lesson
  • Virtual LAN Concepts
  • VLAN and VLAN Trunking Configuration and Verification
  • Lesson Summary
  • Review All the Key Topics
  • Command References
  • Spanning Tree Protocol (IEEE 802.1D)
  • Rapid STP (IEEE 802.1w) Concepts
  • Optional STP Features
  • Lesson Summary
  • Review All the Key Topics
  • Implementing STP
  • Implementing Optional STP Features
  • Implementing RSTP
  • Lesson Summary
  • Review All the Key Topics
  • Command References
  • Troubleshooting STP
  • Troubleshooting Layer 2 EtherChannel
  • Analyzing the Switch Data Plane Forwarding
  • Troubleshooting VLANs and VLAN Trunks
  • Lesson Summary
  • Review All the Key Topics
  • Command References
  • VLAN Trunking Protocol (VTP) Concepts
  • VTP Configuration and Verification
  • VTP Troubleshooting
  • Lesson Summary
  • Review All the Key Topics
  • Command References
  • Securing Access with IEEE 802.1x
  • AAA Authentication
  • DHCP Snooping
  • Switch Stacking and Chassis Aggregation
  • Lesson Summary
  • Review All the Key Topics
  • Comparing Dynamic Routing Protocol Features
  • OSPF Concepts and Operation
  • OSPF Area Design
  • Lesson Summary
  • Review All the Key Topics
  • Implementing Single-Area OSPFv2
  • Implementing Multiarea OSPFv2
  • Additional OSPF Features
  • Lesson Summary
  • Review All the Key Topics
  • Command References
  • EIGRP and Distance Vector Routing Protocols
  • EIGRP Concepts and Operation
  • Lesson Summary
  • Review All the Key Topics
  • Core EIGRP Configuration and Verification
  • EIGRP Metrics, Successors, and Feasible Successors
  • Other EIGRP Configuration Settings
  • Lesson Summary
  • Review All the Key Topics
  • Command References
  • Perspectives on Troubleshooting Routing Protocol Problems
  • Interfaces Enabled with a Routing Protocol
  • Neighbor Relationships
  • Lesson Summary
  • Review All the Key Topics
  • Command References
  • BGP Concepts
  • eBGP Configuration and Verification
  • Lesson Summary
  • Review All the Key Topics
  • Command References
  • Leased-Line WANs with HDLC
  • Leased-Line WANs with PPP
  • Troubleshooting Serial Links
  • Lesson Summary
  • Review All the Key Topics
  • Command References
  • Metro Ethernet
  • Multiprotocol Label Switching (MPLS)
  • Lesson Summary
  • Review All the Key Topics
  • Internet Access and Internet VPN Fundamentals
  • GRE Tunnels and DMVPN
  • PPP over Ethernet
  • Lesson Summary
  • Review All the Key Topics
  • Command References
  • IPv4 Access Control List Basics
  • Standard Numbered IPv4 ACLs
  • Practice Applying Standard IP ACLs
  • Lesson Summary
  • Review All the Key Topics
  • Additional Practice for This Lesson’s Processes
  • Command References
  • Answers to Earlier Practice Problems
  • Extended Numbered IP Access Control Lists
  • Named ACLs and ACL Editing
  • Troubleshooting with IPv4 ACLs
  • Lesson Summary
  • Review All the Key Topics
  • Command References
  • Answers to Earlier Practice Problems
  • Introduction to QoS
  • Classification and Marking
  • Congestion Management (Queuing)
  • Shaping and Policing
  • Congestion Avoidance
  • Lesson Summary
  • Review All the Key Topics
  • VLAN Routing with Router 802.1Q Trunks
  • VLAN Routing with Layer 3 Switch SVIs
  • VLAN Routing with Layer 3 Switch Routed Ports
  • Lesson Summary
  • Review All the Key Topics
  • Command References
  • FHRP and HSRP Concepts
  • Implementing HSRP
  • Troubleshooting HSRP
  • Lesson Summary
  • Review All the Key Topics
  • Command References
  • Problems Between the Host and the Default Router
  • Problems with Routing Packets Between Routers
  • Lesson Summary
  • Review All the Key Topics
  • Normal IPv6 Operation
  • Troubleshooting IPv6
  • Lesson Summary
  • Review All the Key Topics
  • Command References
  • OSPFv3 for IPv6 Concepts
  • OSPFv3 Configuration
  • OSPFv3 Verification and Troubleshooting
  • Lesson Summary
  • Review All the Key Topics
  • Command References
  • EIGRP for IPv6 Configuration
  • EIGRP for IPv6 Verification and Troubleshooting
  • Lesson Summary
  • Review All the Key Topics
  • Command References
  • IPv6 Access Control List Basics
  • Configuring Standard IPv6 ACLs
  • Configuring Extended IPv6 ACLs
  • Other IPv6 ACL Topics
  • Lesson Summary
  • Review All the Key Topics
  • Command References
  • Answers to Earlier Practice Problems
  • Simple Network Management Protocol
  • IP Service Level Agreement
  • SPAN
  • Lesson Summary
  • Review All the Key Topics
  • Command References
  • Cloud Computing Concepts
  • WAN Traffic Paths to Reach Cloud Services
  • Virtual Network Functions and Services
  • Lesson Summary
  • Review All the Key Topics
  • SDN and Network Programmability Basics
  • Examples of Network Programmability and SDN
  • Cisco APIC-EM Path Trace ACL Analysis Application
  • Lesson Summary
  • Review All the Key Topics
  • Advice About the Exam Event
  • Exam Review
  • Always Get the Latest at the Book’s Product Page
  • Technical Content
  • The APIC-EM Path Trace ACL Analysis Tool
  • Practice Problems
  • Answers to Earlier Practice Problems
  • RIP and Routing Protocol Concepts
  • Core RIPv2 Configuration and Verification
  • Optional RIPv2 Configuration and Verification
  • Troubleshooting RIPv2
  • Review All the Key Topics
  • Command References
  • Frame Relay Overview
  • Frame Relay Addressing
  • Network Layer Addressing with Frame Relay
  • Review All the Key Topics
  • Frame Relay Configuration and Verification
  • Frame Relay Troubleshooting
  • Review All the Key Topics
  • Command Reference to Check Your Memory
  • “Do I Know This Already?” Quiz
  • Problem Isolation Using the ping Command
  • Problem Isolation Using the traceroute Command
  • Telnet and SSH
  • Review All the Key Topics
  • Dial Access with Modems and ISDN
  • Gateway Load Balancing Protocol (GLBP)
  • HSRP Tracking
  • (OSPFv2) Link-State Advertisements
  • (OSPFv3) Link-State Advertisements
  • IPv6 Routing Protocols as Discussed in This Book
  • ICND2 200-105 Exam Topics in Numeric Order
  • Mapping of Book Lessons to ICND2 200-105 Exam Topics
  • CCNA R&S Exam Topics with ICND2 Subset Noted
icnd2-200-105 icnd2-200-105
ICND2-200-105
Pearson Cisco: CCNA Routing and Switching (ICND2 200-105)...
ISBN : 9781616917241
Rating :
(25)
  • Free Trial
    • uCertify

    uCertify provides courses, simulator, labs, test prep kits for IT certifications including Microsoft, Oracle, Cisco, CompTIA, CIW, PMI, ISC2, Linux, Zend, IC3, Adobe, and many more.

    © 2002-2018 uCertify. All Rights Reserved

    Know Us

    • About us
    • Careers
    • Partners
    • Sitemap
    • Contact us
    • Terms & Conditions
    • Privacy Statement