ICND2-Simulator : Interconnecting Cisco Networking Devices Part 2

ICND2-Simulator
ICND2-Simulator
Interconnecting Cisco Networking Devices Part 2
ISBN : 978-1-61691-760-9
Gain hands-on expertise in Cisco ICND2-200-105 exam by Interconnecting Cisco Networking Devices Part 2 performance based labs. Performance based labs are versatile - labs simulate real-world, hardware, software & command line interface environments and can be mapped to any text-book, course & training. Cisco ICND2-200-105 is a globally recognized, foundation-level credential designed for IT professionals, IT network practitioners to validate the expertise and technical knowledge required for WAN Technologies; LAN Switching Technologies; Routing Technologies; Infrastructure Services; and Infrastructure Maintenance.

Labs

Online labs can be used to supplement training. uCertify labs are an inexpensive & safe way to explore and learn. uCertify labs are versatile - labs simulate real-world, hardware, software & command line interface environments and can be mapped to any text-book, course & training.

Here's What You Get

Performance based lab
115+

Hands on Activities

Spanning Tree Protocol Concepts

  • Configuring an EtherChannel

Spanning Tree Protocol Implementation

  • Finding out the root, designated, and blocking ports for a vlan
  • Determining the bridge states within a switched network I
  • Determining the bridge states within a switched network II
  • Troubleshooting STP
  • Configuring PortFast
  • Configuring a switch to have a better priority
  • Setting the interface STP cost
  • Viewing the list of root switches
  • Determining the root bridge
  • Determine the address of the current root bridge

Troubleshooting LAN Switching

  • Analyzing paths
  • Troubleshooting VLAN
  • Finding out the frame's destination MAC address
  • Discovering IP addresses and interfaces

Troubleshooting IPv4 Routing Part I

  • Performing an extended traceroute
  • Performing an extended ping

Troubleshooting IPv4 Routing Part II

  • Troubleshooting IPv4 addressing
  • Selecting IP VLSM route I
  • Selecting IP VLSM route II
  • Interpreting the show ip route output
  • Testing the reverse route

Creating Redundant First-Hop Routers

  • Configuring GLBP I
  • Configuring GLBP II
  • Configuring GLBP III
  • Configuring HSRP
  • Configuring HSRP on an interface
  • Configuring the HSRP preemption
  • Configuring the HSRP version to 2
  • Configuring HSRP tracking

Implementing OSPF for IPv4

  • Configuring OSPF over a wide-area Frame Relay network
  • Manipulating OSPF metric using point-to-point subinterfaces
  • Configuring router ID
  • Configuring the OSPF cost
  • Configuring the OSPF bandwidth
  • Configuring the OSPF reference bandwidth

Implementing EIGRP for IPv4

  • Configuring bandwidth of a route
  • Configuring delay
  • Configuring EIGRP I
  • Configuring EIGRP II
  • Configuring auto-summary
  • Disabling auto-summary
  • Setting hello-interval
  • Configuring the IP addresses and EIGRP
  • Setting maximum number of paths
  • Configuring variance
  • Enabling EIGRP on all router interfaces
  • Expanding a network

Implementing IPv4 Routing Protocols

  • Troubleshooting path
  • Troubleshooting OSPF multi-area routing
  • Troubleshooting eigrp routing
  • Analyzing a Layer 3 problem
  • Testing the forward route
  • Troubleshooting the forward route issue
  • Troubleshooting VLAN

Implementing Point-to-Point WANs

  • Configuring PPP CHAP authentication on the serial interface
  • Configuring serial link
  • Configuring the clock rate
  • Configuring encapsulation PPP
  • Configuring the clock rate and bandwidth
  • Configuring the bandwidth and description

Implementing Frame Relay

  • Configuring OSPF in a point-to-multipoint topology
  • Configuring OSPF in a point-to-point topology
  • Configuring frame relay using point-to-point subinterfaces
  • Configuring Frame Relay without the use of Inverse ARP
  • Verifying frame relay configuration
  • Configuring frame relay I
  • Configuring frame relay II
  • Configuring frame relay III
  • Configuring EIGRP in a Frame Relay network
  • Configuring OSPF in a Frame Relay network
  • Configuring a multipoint subinterface for a frame relay network
  • Determining DLCI

Troubleshooting IPv6 Routing

  • Configuring OSPFv3
  • Configuring IPv6 routing I
  • Configuring IPv6 routing II
  • Configuring OSPFv3 neighbors I
  • Configuring OSPFv3 neighbors II
  • Configuring IPv6 frame relay I
  • Configuring IPv6 frame relay II
  • Configuring OSPFv3 route in a frame relay network
  • Configuring OSPFv3 router ID
  • Configuring OSPFv3 interface cost
  • Configuring the OSPFv3 serial interface bandwidth
  • Pinging devices using IPv6 hostnames
  • Troubleshooting IPv6 addressing

Implementing OSPF For IPv6

  • Generating log messages
  • Troubleshooting OSPFv3

Implementing EIGRP For IPv6

  • Configuring EIGRP for IPv6 I
  • Configuring EIGRP for IPv6 II
  • Configuring EIGRP for IPv6 III
  • Configuring EIGRP for IPv6 Frame Relay
  • Troubleshooting IPv6
  • Configuring EIGRP for IPv6 neighbors I
  • Configuring EIGRP for IPv6 neighbors II

Managing Network Devices

  • Configuring SNMP communities
  • Configuring an SNMP host
  • Configuring an SNMP contact
  • Configuring an SNMP location
  • Configuring an SNMP chassis ID
  • Enabling the sending of the SNMP traps Linkup and LinkDown
  • Using internal buffer to log system messages
  • Disabling logging
  • Altering the size of the internal buffer
  • Configuring the device to use an external syslog server

Managing IOS Files

  • Recovering the password
  • Booting a new router IOS
  • Setting the Configuration Register
  • Viewing terminal history
  • Configuring NetFlow

Managing IOS Licensing

  • Installing IOS license
  • Removing IOS license
  • Verifying IOS license

Routing and WANs

  • Disabling keepalives
  • Inactivating DLCI

Exam Information

Cisco ICND2-200-105 is a globally recognized, foundation-level credential designed for IT professionals, IT network practitioners to validates the expertise and technical knowledge required for LAN Switching Fundamentals; Infrastructure Maintenance; Infrastructure Services; Network Fundamentals; and Routing Fundamentals.

Prepare for the following certifications

Career Prospects
  • Network Specialist
  • Network Technician
  • Network Administrator
  • Network Support Engineer
Exam FAQs
What is the format of the exam?
Performance-based, multiple-choice, drag-and-drop, router simulation, testlet, and simlet.
How many questions are asked in the exam?
The exam contains 45-55 questions.
What is the duration of the exam?
90 minutes