Archive for the ‘MCSA’ category

What are collation settings?

September 3rd, 2009

Collation settings are fundamental to the structure and working of SQL Server 2005 databases. They include character set, sort order, and other locale-specific settings. Many server-to-server activities can fail or yield inconsistent results if collation settings are not consistent across servers. Collation settings can be applied to the server, database, column, or expression level.

Like this post? Share it with others
If you like this article, please leave a comment or subscribe this blog via RSS or via e-mail, Bookmark and share through your network. Click the AddThis button below. Thanks.
  • Share/Bookmark

What is the IPCONFIG /all command?

August 31st, 2009

The IPCONFIG /all command is used to view the full TCP/IP configuration for all the adapters. Without the [all] parameter, the IPCONFIG command can be used to view only such information as IP address, subnet mask, default gateway, etc., of a networked computer.

Like this post? Share it with others
If you like this article, please leave a comment or subscribe this blog via RSS or via e-mail, Bookmark and share through your network. Click the AddThis button below. Thanks.
  • Share/Bookmark

What is the NSLOOKUP command?

August 31st, 2009

The NSLOOKUP command is used to query a DNS for a host name to IP address resolution. When the NSLOOKUP command is run, a request is issued to resolve a fully qualified domain name, such as ucertify.com, to an IP address.
From a command prompt, when you enter NSLOOKUP ucertify.com, it will give the following result :

Name: ucertify.com
Address: 205.138.192.8

Like this post? Share it with others
If you like this article, please leave a comment or subscribe this blog via RSS or via e-mail, Bookmark and share through your network. Click the AddThis button below. Thanks.
  • Share/Bookmark

Detecting and Preventing Social Engineering and other Hacking Processes

August 31st, 2009

Social engineering attacks are growing fast, and today majority of attackers use social engineering techniques to infiltrate into a victim’s network. It is very difficult for a technician to identify social engineering attacks, as these attacks do not involve any technical tools or any software-coding program. A social engineering hacker attempts to persuade users to provide information that will enable him to use their computers or computer resources. Many technicians think that such attacks are a cause of concern only for large organizations. It used to be the case earlier, but now hackers target all sectors.

Social engineering attacks succeed because they are allowed to succeed, i.e., in most cases the fraud could have been avoided if the victim had not provided the information that the hacker tried to extract. Getting information through social engineering methods is easier than making complicated code, and the information that a hacker gets through social engineering is correct and more reliable. To secure users from social engineering attacks as well as other attacks, you need to know what type of attacks they might fall victim to from social engineering hackers or any other Technical hacker. You should also try to find out what a hacker wants and calculate the possible loss to your organization. Accordingly, the security policy of the company should be reviewed and preventive measures should be taken. The changing must include educating your employees so that they can recognize the situations of social engineering and react swiftly. This helps others not to get affected by the same procedure or cheated by the same person again. The social engineering hacker might use various tricks to persuade his victim to reveal vital information. Depending upon the mental ability of the victim, he judges and applies his techniques while interacting with him.

The simplest way of social engineering hacking is to ask for the information directly from the victim. Seems easy? Yes it is. The only thing an attacker needs is presence of mind. A social engineering hacker can be anyone. Even your boss or manager can call you and ask for your login ID and Password, or it might be the technician who is offering you help. Users can also be attacked through fake e-mails, which might lead them to open a Web site designed to trick the recipients in giving important information such as usernames, passwords or addresses. This trick is also very popular with technical hackers, but instead of sending e-mails, they persuade victims to visit Web sites, which contain scripts that deploy Trojan virus or Key-loggers to the victims’ computers. Nowadays hackers also use mouse loggers and screen grabbers to obtain vital information. Organizations should take proper steps to educate their employees about different social engineering techniques.

Some other common types of attacks that hackers adopt are as follows:

Types of attacks

  • Back Door:
  • Spoofing:
  • Denial-of-Service (DoS):
  • Password Guessing Attack:
  • Replay Attack:

These days organizations have to upgrade their security to protect crucial information, and in the same way hackers are also developing more sophisticated techniques of attack. At the end of this article you have learnt about various social engineering techniques and steps to be taken to prevent such attacks from taking place.

Like this post? Share it with others
If you like this article, please leave a comment or subscribe this blog via RSS or via e-mail, Bookmark and share through your network. Click the AddThis button below. Thanks.
  • Share/Bookmark

What is a piconet network?

August 31st, 2009

Bluetooth is a short range communication technology. This new technology replaces wires, providing wireless connectivity to various devices while maintaining high levels of security. Bluetooth networks are not permanent as compared to other networks where a central communication point is needed, such as a hub or a router. A Bluetooth network can be formed when two Bluetooth devices are within a range of ten meters, enabling them to communicate directly with each other. This dynamically created network is called a piconet. A Bluetooth-enabled device can support up to seven other Bluetooth devices in a master-slave relationship; the first Bluetooth device is the master, and all the other devices are slaves that communicate with the master in one piconet.

Like this post? Share it with others
If you like this article, please leave a comment or subscribe this blog via RSS or via e-mail, Bookmark and share through your network. Click the AddThis button below. Thanks.
  • Share/Bookmark

What is EIRP?

August 30th, 2009

Effective Isotopic Radiated Power (EIRP) is the power of the signal transmitted from the antenna of an access point (AP). EIRP is calculated as follows:

EIRP = The radio’s power output + Increase in power caused by the antenna – Power lost in the cabling

Like this post? Share it with others
If you like this article, please leave a comment or subscribe this blog via RSS or via e-mail, Bookmark and share through your network. Click the AddThis button below. Thanks.
  • Share/Bookmark

What is IEEE 802.11b?

August 28th, 2009

The IEEE 802.11b standard applies to wireless LAN networks that use radio waves as the transmission medium. These networks each have a separate media access control mechanism, known as Carrier Sense Multiple Access with Collision Avoidance (CSMS/CA), that works like the CSMA/CD mechanism used by the Ethernet. The difference is that in this protocol, when a computer sends its signals, the receiving computer performs a cyclical redundancy check and sends an acknowledgement message to the sending computer if no error is detected.

The IEEE 802.11b networks run at the transmission speed of 11 Mbps with a fallback to 5.5, 2, and 1 Mbps in the 2.4 GHz bandwidth. The radio transmission medium used by these networks is called Direct Sequence Spread Spectrum (DSSS).

Like this post? Share it with others
If you like this article, please leave a comment or subscribe this blog via RSS or via e-mail, Bookmark and share through your network. Click the AddThis button below. Thanks.
  • Share/Bookmark

What is forwarder?

August 27th, 2009

A forwarder is a DNS server that receives queries from other DNS servers on the network. To configure a forwarder in a network, DNS servers on the network are configured to send DNS queries to a particular DNS server. The DNS server acting as a forwarder need not require any special configuration. A forwarder has no secondary zones.

Like this post? Share it with others
If you like this article, please leave a comment or subscribe this blog via RSS or via e-mail, Bookmark and share through your network. Click the AddThis button below. Thanks.
  • Share/Bookmark

What is the Task Manager utility?

August 27th, 2009

Task Manager is a utility that is used for managing applications, processes, and the general system performance and also for viewing the networking and user statistics. The Task Manager utility is used to run or end programs or applications. Administrators use this tool to quickly identify and terminate a rogue application.

This utility can be run by invoking a Windows Security menu by using the Ctrl+Alt+Del key combination and then clicking the Task Manager button or by right-clicking the task bar and then clicking the Task Manager menu option.

Like this post? Share it with others
If you like this article, please leave a comment or subscribe this blog via RSS or via e-mail, Bookmark and share through your network. Click the AddThis button below. Thanks.
  • Share/Bookmark

What is the function of the Server service?

August 27th, 2009

The Server service provides RPC support, file, print, and named pipe sharing over the network. It allows the sharing of local resources, so that other users on the network can access them. If the Server service is stopped on a computer, users will not be able to share files and printers on the computer with other computers on the network. Furthermore, this computer will not be able to satisfy RPC requests. If this service is disabled, any services that explicitly depend on this service will not start.

Like this post? Share it with others
If you like this article, please leave a comment or subscribe this blog via RSS or via e-mail, Bookmark and share through your network. Click the AddThis button below. Thanks.
  • Share/Bookmark
uCertify.com | Our Company | Articles | Contact Us | News and Press Release | uCertify India | Entries (RSS)
MCSE: MCSA, MCTS, MCITP    JAVA Certification: SCJP, SCWCD    Cisco Certification: CCNA, CCENT    A+, Network+, Security+ Project+
Oracle Certification: OCP 11g, OCP 10g, OCA 11g, OCA 10g    CIW foundation    EC-212-32,    CISSP    Photoshop ACE CS4    Adobe Flash ACE, PMP, CAPM
© 2008 uCertify.com. All rights reserved. All trademarks are the property of their respective owners.